Wood use solutions for the bioeconomy presented in Brussels - Zeme un valsts

Wood use solutions for the bioeconomy presented in Brussels

The Finnish forest sector information site forest.fi has joined the “New Wood” project to present wood use solutions for the circular bioeconomy from 25 May to 6 June at Berlaymont, the European Commission's headquarters. The exhibition was opened, together with European Commissioners Jessika Roswall and Christophe Hansen, by Finland's Minister of Agriculture and Forestry, Sari Essayah.

Materials technology start-up company Fiberwood Oy uses wood fibre from forest industry residues to make construction and packaging materials.

The construction sector generates around 42% of the world's carbon dioxide emissions. Some of these arise in the production of stone wool and glass wool. Founded in 2019, Fiberwood began operating in 2022 and has developed technology to turn materials such as sawdust and fibres into insulation materials, acoustic panels and packaging products. Its longer-term aim is both to replace mineral and plastic materials and to find entirely new applications for the products it makes.

The usual practice is to burn forest industry by-products and biomass for energy. Fiberwood uses them more sustainably and more economically, to make products with higher added value.

Fiberwood has developed materials that act as a store for atmospheric carbon dioxide, which is locked into the wood for the whole service life of the products made from them. After use, the products can be recycled into other materials or used to improve soil. The company's goal is to move construction away from fossil resources by using renewable natural resources, pointing the way to a more sustainable construction industry. Fiberwood is building a demonstration production line and a research and development centre in Järvenpää near Helsinki, and continues to develop its products with several partners in Finland and abroad.

Innovations based on wood fibre can significantly increase the added value of forest industry exports and the price per unit of weight.

Fiberwood aims to raise the current average export value per unit of weight from less than one euro to two or three euros. By the company's calculations, this could deliver up to three times the profit from a smaller volume of wood, while easing the pressure on wood availability.

Cellulose film makes the whole cardboard package recyclable

LUT University (Lappeenranta-Lahti University of Technology) and the VTT Technical Research Centre (Valtion teknillinen tutkimuskeskus, National Technical Research Centre) in Finland are developing cellulose materials called Films for Future (F3) to replace plastic in a range of applications, such as food packaging.

Consumers increasingly demand responsibly made products, such as packaging whose life cycle does not burden the environment. Institutions in the European Union are also calling for environmentally friendly packaging materials and solutions. The packaging industry is looking for them in renewable raw materials. Many of these are recyclable and reusable, reducing both the amount of waste and the impact on the environment. Demand for packaging made from renewable materials is considerable.

The production process for the film materials developed in the F3 project is based on lignocellulose. The suitability of the film material for food packaging is also being studied. The cellulose is dissolved using ecologically sustainable solvents (rather than those in use at present, which place a burden on the environment). The resulting film can be used either as a coating for paper or board, or on its own (as a film).

The recyclability and functional properties of this film material are also being studied. A biodegradable coating will improve the recycling of cardboard packaging, allowing the whole package to be sorted as cardboard. The cellulose coating material meets the requirements for the shift to a circular economy and for improved environmental quality set out in the EU directives on packaging and waste.

VTT is responsible for researching and developing the properties of the cellulose film, while LUT University will test the use of the material in various types of packaging. VTT and LUT's packaging technology laboratory are leaders in research into fibre-based and bio-based packaging solutions.

Many Finnish and foreign companies are taking part in the research project. Its results will allow them to develop their own products. The project also aims to promote international cooperation in the sector and to encourage companies to move part of their operations to Finland.

New wood fibre technology to speed up the move away from single-use plastic

Fiberdom makes single-use tableware from wood fibre, and the company's longer-term goal is to do away with single-use plastic in several industries. Consumer behaviour, corporate responsibility and targets, and regulatory change are moving wood-based innovations closer to the point at which unnecessary plastic use can be brought to an end.

In April, Fiberdom announced that it had received 3.5 million euros in funding to speed up the development of its patented plastic-free materials and to scale up production.

The material the company has developed is made without synthetic chemicals, from FSC-certified wood fibre. The key difference is Fiberdom's patented heat and pressure treatment, which turns cellulose or cardboard into a highly durable and easily moulded material suitable for a variety of uses. The material can be recycled, and it is also compostable.

Fiberdom's technology solves many of the problems associated with current wood fibre-based alternatives, such as limited formability, insufficient material strength and the use of additives that are unsuitable for recycling.

Fiberdom's first commercial application is single-use tableware, made at the company's factory in Vantaa near Helsinki and already available to consumers in Finland's two largest retail chains, S and K Groups.

The 3.5 million euros in funding received recently will make it possible to speed up research and development and to extend the technology into new market segments. Fiberdom aims to replace unnecessary plastic products in areas such as food packaging, storage solutions and the furniture industry.

According to Fiberdom's forecasts, the global wood fibre packaging market will grow from 467 billion US dollars in 2025 to as much as 567 billion US dollars in 2034. The company is looking for strategic partners in order to extend the use of its technology to other sectors.

“The funding is a decisive moment, as we scale up our revolutionary technology to meet the growing global demand for genuinely alternative materials,” Fiberdom's chief executive Tomi Järvenpää stresses in a press release.

Add a comment